Create a new part

POST /v1/parts

Create a part from a model file you have uploaded. Uploading takes three calls: get a signed upload URL, send the file bytes to it, then create the part here with the returned path.

Send Authorization: ApiKey <your-api-key> on the Printago API calls (steps 1, 3 and 4). The upload itself (step 2) goes straight to storage and must not carry it.

1. Get a signed upload URL

curl -X POST https://api.printago.io/v1/storage/signed-upload-urls \
  -H "Authorization: ApiKey $PRINTAGO_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{ "filenames": ["Benchy.3mf"] }'

Each entry in signedUrls has a path (keep it for step 3), an uploadUrl and the HTTP method to use. The URL expires after 5 minutes.

2. Upload the file bytes

curl -X PUT --upload-file Benchy.3mf \
  -H "Content-Type: application/octet-stream" \
  "$UPLOAD_URL"

Send the raw file as the request body using the method from step 1 (PUT). Any Content-Type is accepted.

3. Create the part

Call this endpoint with the path from step 1 in fileUris and set type to match the primary file: stl, 3mf, gcode3mf (a 3MF with sliced G-code inside), gcode, step, scad (OpenSCAD), cadquery or build123d. The file is moved from the upload area into the part's permanent storage, and fileUris in the response holds the new location.

4. Wait for processing

After the file is attached, Printago processes it: it reads metadata and filament channels, renders thumbnails, splits 3MF plates and estimates print time. processingStatus reports where that stands:

`processingStatus`	Meaning
`"processing"`	Still running. `processing.stages` shows each step (`fetch`, `read-metadata`, `thumbnails`, `split-plates`, `estimate`).
`null`	Ready to print.
`"failed"`	Processing stopped. `processing.failedStage` and `processing.error` say where and why.

By default this request waits for processing to finish (up to roughly 20 seconds) and returns the ready part. Large files can take longer, in which case the part comes back with processingStatus: "processing". Pass ?async=true to return immediately instead. Either way, poll GET /v1/parts/{id} until processingStatus is no longer "processing".

A part cannot be printed until processingStatus is null. POST /v2/builds rejects parts that are still processing or have failed. To retry a failed part, call POST /v1/parts/retry-processing with its ID, or upload a corrected file and PATCH /v1/parts/{id} with the new uploads: path in fileUris.

Requires: part.create

Query Parameters

async optional

boolean

When true, the response returns as soon as file processing is submitted, with `processingStatus: "processing"`; poll the part until the status clears. When false or omitted, the response waits for processing to finish (bounded — a part still processing after the wait is returned as-is, to be polled).

Request Body

Part data including file URIs and optional material assignments

PartInsertWithMaterials

arrangeableoptional

boolean

assignedMaterialsoptional

Record<string, object[]>

Default material assignments per filament channel, keyed by channel index. Each value is a list of { "variantId" }, { "materialId" }, { "groupId" } or { "materialType" } specs. Builds use these unless they override materials.

customMetadataoptional

Record<string, any>

Construct a type with a set of properties K of type T

descriptionrequired

string

fileUrisrequired

string[]

Files for the part. On create, pass the path values from POST /v1/storage/signed-upload-urls (they start with uploads:). The first file is the primary model and is the one that gets processed. Add more files when the primary file needs them, for example files an OpenSCAD model includes. In responses, these are the files' permanent storage paths.

min items: 1

folderIdoptionalnullable

string

pattern: ^[a-z0-9]{24}$

namerequired

string

overriddenProcessProfileIdrequirednullable

string

ID of a process profile to slice this part with instead of the matched printer's profile. Send null to use the printer's profile.

pattern: ^[a-z0-9]{24}$

parametersrequired

object[]

acceptedContentTypesoptional

string[]

File-parameter-only fields (populated when `type === PartParameterVariableType.File`). Kept optional on the shared interface so scalar-parameter call sites do not need union-narrowing. See `FilePartParameter` for the strict shape. `acceptedContentTypes` is intentionally an OPEN `string[]` (not a narrow union). The customizer emits SVG, but Etsy attachments and direct API order ingestion can carry ANY mime type (PNG / JPG / PDF / AI / etc). Builders enforce kind constraints; the shared type stays open.

defaultoptional

number | string | boolean

defaultUrioptional

string

Optional fallback file URI (e.g. a known SVG in storage).

descriptionoptional

string

labeloptional

string

What the parameter is shown under wherever a customer or an operator fills it in; `name` stays the key everything binds by (SKU options, order inputs, build overrides, and — for a 3MF text slot — the text volume the substitution travels to). A parameter without one is shown under its name. This interface is the one the API's request validators are generated from, and it is a second declaration of the shape in `../part/parameter`. A field added to only one of them is accepted by the code and then pruned off the wire.

maxoptional

number

minoptional

number

multipleoptional

boolean

Whether the slot accepts >1 file. Reserved for forward compat — the Phase 5 resolver assumes single-file per slot for v1.

namerequired

string

optionsoptional

object[]

labeloptional

string

valuerequired

string | number

serialReuseoptional

"share" | "increment"

For a 3MF text-slot parameter bound to a sequence: whether occurrences repeated on one plate share a serial or each consume the next one. Absent means {@link TextSlotSerialReuse.Share }, today's duplicate-name meaning.

shareincrement

sizingoptional

"stretch" | "fit" | "unconstrained"

3MF text placeholders only: how a substituted value is sized against the bounds of the text volume it replaces. Absent means "fit within bounds", which is what every part declared before the setting existed carries. Declared on this shape as well as on `../part/parameter` for the reason `label` is — the API's request validators are generated from this one, and a field on only the other is pruned off the wire.

stretchfitunconstrained

stepoptional

number

typerequired

"number" | "string" | "boolean" | "file"

numberstringbooleanfile

valueoptional

number | string | boolean

printTagsrequired

object

filament.typeoptional

string

printer.idoptional

string

printer.modelNameoptional

string

printer.nozzleDiameteroptional

string

printer.provideroptional

string

user.tagsoptional

string

slicerOverrideoptionalnullable

string

typerequired

enum

scadcadquerybuild123dstlstep3mfgcode3mfgcode

use3MFProcessProfileoptional

boolean

3MF parts only. Slice with the process profile embedded in the 3MF instead of the printer's. When omitted on a 3MF part (and overriddenProcessProfileId is null), it is turned on for you.

userTagsoptional

string[]

max items: 10

Example Request

application/json

{
  "name": "string",
  "type": "scad",
  "description": "string",
  "fileUris": [
    "string"
  ],
  "parameters": [
    {
      "default": 1,
      "options": [
        {
          "value": "string",
          "label": "string"
        }
      ],
      "description": "string",
      "min": 1,
      "max": 1,
      "step": 1,
      "acceptedContentTypes": [
        "string"
      ],
      "multiple": true,
      "defaultUri": "string",
      "label": "string",
      "serialReuse": "share",
      "sizing": "stretch",
      "name": "string",
      "type": "number",
      "value": 1
    }
  ],
  "printTags": {
    "printer.provider": "string",
    "printer.id": "string",
    "printer.nozzleDiameter": "string",
    "printer.modelName": "string",
    "filament.type": "string",
    "user.tags": "string"
  },
  "customMetadata": {},
  "overriddenProcessProfileId": "string",
  "folderId": "string",
  "slicerOverride": "string",
  "use3MFProcessProfile": true,
  "arrangeable": true,
  "userTags": [
    "string"
  ],
  "assignedMaterials": {}
}

Examples

Create a part from an uploaded 3MF

fileUris takes the path returned by POST /v1/storage/signed-upload-urls, including the uploads: prefix. The response below is the part after processing finished (abbreviated).

Request

{
  "name": "Benchy",
  "type": "3mf",
  "description": "",
  "fileUris": [
    "uploads:k3m9x2p7q8r4t6v1w5y0z3a2/x4c8v2b6n0m3k7j1h5g9f2d6/Benchy.3mf"
  ],
  "parameters": [],
  "printTags": {},
  "overriddenProcessProfileId": null
}

Response

{
  "id": "p8f2k6m1q9w3e7r5t0y4u2i6",
  "storeId": "k3m9x2p7q8r4t6v1w5y0z3a2",
  "name": "Benchy",
  "type": "3mf",
  "description": "",
  "fileUris": [
    "k3m9x2p7q8r4t6v1w5y0z3a2/parts/p8f2k6m1q9w3e7r5t0y4u2i6/Benchy.3mf"
  ],
  "fileHashes": [
    "9f2c4e81a7b3d6f05c8e1a4b7d2f9c3e6a0b5d8f1c4e7a2b9d6f3c0e5a8b1d4f"
  ],
  "thumbnailUri": "k3m9x2p7q8r4t6v1w5y0z3a2/parts/p8f2k6m1q9w3e7r5t0y4u2i6/thumbnail.png",
  "parameters": [],
  "printTags": {},
  "overriddenProcessProfileId": null,
  "folderId": null,
  "materials": [
    {
      "index": 0,
      "color": "#00AE42",
      "type": "PLA"
    }
  ],
  "use3MFProcessProfile": true,
  "arrangeable": true,
  "userTags": [],
  "uploadedAt": "2026-09-23T14:02:31.884Z",
  "processingStatus": null,
  "processing": {
    "workflowKey": "p8f2k6m1q9w3e7r5t0y4u2i6-9f2c4e81a7b3d6f0",
    "fileHash": "9f2c4e81a7b3d6f05c8e1a4b7d2f9c3e6a0b5d8f1c4e7a2b9d6f3c0e5a8b1d4f",
    "attempt": 0,
    "startedAt": "2026-09-23T14:02:31.912Z",
    "finishedAt": "2026-09-23T14:02:38.407Z",
    "stages": [
      {
        "key": "fetch",
        "status": "done"
      },
      {
        "key": "read-metadata",
        "status": "done"
      },
      {
        "key": "thumbnails",
        "status": "done"
      },
      {
        "key": "split-plates",
        "status": "done"
      },
      {
        "key": "estimate",
        "status": "done"
      }
    ]
  },
  "createdAt": "2026-09-23T14:02:31.620Z",
  "updatedAt": "2026-09-23T14:02:38.407Z"
}

Create without waiting (`?async=true`)

POST /v1/parts?async=true returns as soon as processing starts. Poll GET /v1/parts/{id} until processingStatus changes.

Request

{
  "name": "Cable Clip",
  "type": "stl",
  "description": "Clip for 6 mm cables",
  "fileUris": [
    "uploads:k3m9x2p7q8r4t6v1w5y0z3a2/t5r9e3w7q1a4s8d2f6g0h3j7/Cable Clip.stl"
  ],
  "parameters": [],
  "printTags": {},
  "overriddenProcessProfileId": null,
  "userTags": [
    "clips"
  ]
}

Response

{
  "id": "c7l1i5p9c3l6i0p4q8w2e5r9",
  "storeId": "k3m9x2p7q8r4t6v1w5y0z3a2",
  "name": "Cable Clip",
  "type": "stl",
  "description": "Clip for 6 mm cables",
  "fileUris": [
    "k3m9x2p7q8r4t6v1w5y0z3a2/parts/c7l1i5p9c3l6i0p4q8w2e5r9/Cable Clip.stl"
  ],
  "thumbnailUri": null,
  "userTags": [
    "clips"
  ],
  "processingStatus": "processing",
  "processing": {
    "workflowKey": "c7l1i5p9c3l6i0p4q8w2e5r9-3b7e0a4c8f1d5b9e",
    "fileHash": "3b7e0a4c8f1d5b9e2a6c0f4b8d1e5a9c3f7b0d4e8a2c6f9b1d5e0a3c7f4b8d2e",
    "attempt": 0,
    "startedAt": "2026-09-23T14:11:05.230Z",
    "stages": [
      {
        "key": "fetch",
        "status": "pending"
      },
      {
        "key": "read-metadata",
        "status": "pending"
      },
      {
        "key": "thumbnails",
        "status": "pending"
      },
      {
        "key": "split-plates",
        "status": "pending"
      },
      {
        "key": "estimate",
        "status": "pending"
      }
    ]
  },
  "createdAt": "2026-09-23T14:11:04.975Z",
  "updatedAt": "2026-09-23T14:11:05.230Z"
}

Response Schema

Part

arrangeableoptional

boolean

createdAtrequired

string

format: date-time

customMetadataoptional

Record<string, any>

Construct a type with a set of properties K of type T

descriptionrequired

string

fileHashesrequired

string[]

min items: 1

fileUrisrequired

string[]

min items: 1

folderIdoptionalnullable

string

pattern: ^[a-z0-9]{24}$

gcodePlateUrisoptionalnullable

Record<string, string>

Construct a type with a set of properties K of type T

idrequired

string

pattern: ^[a-z0-9]{24}$

materialsrequirednullable

object[]

colorrequirednullable

string

pattern: ^#{0,1}[0-9A-F]{6}|[0-9A-F]{8}$

identifieroptionalnullable

string

indexrequired

number

min: 0

nameoptionalnullable

string

skipoptional

boolean

typerequirednullable

string

meshErroroptionalnullable

string

Why tessellating this source failed. Set with `meshUri` cleared, so a file that cannot be meshed is stated once instead of re-converting on every print forever. Replacing the source moves `fileHashes[0]` off this hash, which retires the error without anything having to clear it.

meshSourceHashoptionalnullable

string

`fileHashes[0]` of the source the mesh state describes — the file `meshUri` was tessellated from, or the one `meshError` failed on.

meshUrioptionalnullable

string

Tessellated mesh derived from a boundary-representation source (STEP). The slicer CLI only reads meshes, so this — not `fileUris[0]` — is what the print and estimation paths feed it.

metadataoptionalnullable

object

filamentColorsrequired

string[]

filamentDensitiesoptional

number[]

filamentDiametersoptional

number[]

filamentIdsoptional

string[]

filamentTyperequired

string[]

nozzleDiameterrequired

string

plateRenderSourceHashoptional

string

`fileHashes[0]` of the source that produced the plates' `thumbnailRenderedUri`. Re-extraction carries the renders forward only while this still matches the part's current source; a replaced file leaves them behind rather than showing the previous model's geometry.

platesoptional

object[]

filamentIdsoptional

string[]

filamentMapModeoptional

string

filamentMapsoptional

number[]

gcodeFileoptional

string

idrequired

number

lockedoptional

boolean

nameoptional

string

patternBboxFileoptional

string

pickDataoptional

string

pickFileoptional

string

pickUploadedUrioptional

string

slicedoptional

object

extruderTypeoptional

string

filamentMapsoptional

string

filamentsoptional

object[]

colorrequired

string

idrequired

string

trayInfoIdxrequired

string

typerequired

string

usedGrequired

number

usedMrequired

number

indexoptional

number

labelObjectEnabledoptional

boolean

layerFilamentListsoptional

object[]

filamentListrequired

number

layerRangesrequired

string

nozzleDiametersoptional

string

nozzleVolumeTypeoptional

string

objectsoptional

object[]

identifyIdrequired

string

namerequired

string

skippedrequired

boolean

outsideoptional

boolean

predictionoptional

number

printerModelIdoptional

string

supportUsedoptional

boolean

timelapseTypeoptional

string

warningsoptional

object[]

errorCoderequired

string

levelrequired

number

msgrequired

string

weightoptional

number

thumbnailDataoptional

string

thumbnailFileoptional

string

thumbnailNoLightFileoptional

string

thumbnailRenderedUrioptional

string

The plate re-rendered by the three.js builder. Written by a different flow, and to a different storage path, than the archive copy above — a later metadata reprocess re-copies the archive image and must not be able to overwrite this. Prefer it over `thumbnailUploadedUri` (see `plateThumbnailUri`).

thumbnailUploadedUrioptional

string

The archive's own plate preview, copied out at metadata-extraction time.

topDataoptional

string

Base64 PNG data for the top/pick images, staged before upload then cleared.

topFileoptional

string

topUploadedUrioptional

string

Uploaded URIs for the plate's top-down image and color-coded object pick mask. Used by the visual skip-objects picker.

printerModelrequired

string

profileCompatrequired

object

compatiblerequired

string[]

saferequired

string[]

slicedrequired

string

slicerVersionoptionalnullable

object

enginerequired

"orcaslicer" | "bambu-studio" | "prusaslicer" | "superslicer"

orcaslicerbambu-studioprusaslicersuperslicer

versionrequired

string

textSlotsoptional

object[]

PrintagoParam text slots with their per-plate occurrence identities, re-detected whenever the file is (re)processed. The saved reuse mode lives on the slot's parameter, which survives a file replacement; this is the geometry-derived half that must always track the current file.

fontNameoptional

string

`font_name` of the first volume seen with this key.

fontVersionoptional

string

`font_version` of the first volume seen with this key.

keyrequired

string

The matching volume/object name — the substitution key.

labelrequired

string

The label this slot's parameter is shown under.

occurrencesoptional

object[]

Every printable object instance carrying this slot, across all plates. Absent when the file predates occurrence detection or has no plate metadata to resolve instances against.

identifyIdoptional

string

Bambu's per-instance id, when present (matches gcode object labels).

instanceIdrequired

number

0-based instance index among the object's build items.

objectIdrequired

string

`model_settings.config` object id (matches the root model's build items).

plateIdrequired

number

surfaceTypeoptional

number

`surface_type` of the first volume seen with this key (0=flat).

textrequired

string

The text authored into the volume. It prints as-is when the slot goes unfilled, which makes it the parameter's default.

volumeCountrequired

number

How many text volumes in the file carry this slot name.

namerequired

string

overriddenProcessProfileIdrequirednullable

string

ID of a process profile to slice this part with instead of the matched printer's profile. Send null to use the printer's profile.

pattern: ^[a-z0-9]{24}$

parametersrequired

object[]

acceptedContentTypesoptional

string[]

defaultoptional

number | string | boolean

defaultUrioptional

string

Optional fallback file URI (e.g. a known SVG in storage).

descriptionoptional

string

labeloptional

string

maxoptional

number

minoptional

number

multipleoptional

boolean

Whether the slot accepts >1 file. Reserved for forward compat — the Phase 5 resolver assumes single-file per slot for v1.

namerequired

string

optionsoptional

object[]

labeloptional

string

valuerequired

string | number

serialReuseoptional

"share" | "increment"

shareincrement

sizingoptional

"stretch" | "fit" | "unconstrained"

stretchfitunconstrained

stepoptional

number

typerequired

"number" | "string" | "boolean" | "file"

numberstringbooleanfile

valueoptional

number | string | boolean

printTagsrequired

object

filament.typeoptional

string

printer.idoptional

string

printer.modelNameoptional

string

printer.nozzleDiameteroptional

string

printer.provideroptional

string

user.tagsoptional

string

processingoptionalnullable

object

Progress of the most recent processing run: when it started and finished, the status of each stage (pending, running, done, skipped or failed) and, on failure, failedStage and error.

attemptrequired

number

How many ingests this part has had before this one — a monotonic per-part counter, not a per-file retry count, so no two runs can ever share a workflow key. See {@link nextPartIngestAttempt }.

erroroptional

string

failedStageoptional

"fetch" | "read-metadata" | "thumbnails" | "split-plates" | "estimate"

fetchread-metadatathumbnailssplit-platesestimate

fileHashrequired

string

`fileHashes[0]` this ingest describes; replacing the file retires it.

finishedAtoptional

string

stagesrequired

object[]

attemptsoptional

number

Times the stage has been started, so the UI can say "retrying · attempt N".

erroroptional

string

keyrequired

"fetch" | "read-metadata" | "thumbnails" | "split-plates" | "estimate"

fetchread-metadatathumbnailssplit-platesestimate

statusrequired

"running" | "done" | "pending" | "failed" | "skipped"

runningdonependingfailedskipped

startedAtrequired

string

workflowKeyrequired

string

The workflow run that owns this state. A retry or a file replacement writes a new key first, so a superseded run's writes no longer match and are dropped instead of clobbering the newer run's progress.

processingStatusoptionalnullable

"processing" | "failed"

"processing" while the file is being processed, "failed" if processing stopped, and null once the part is ready to print.

processingfailed

slicerOverrideoptionalnullable

string

slicingEstimateoptionalnullable

object

estimatedPrintTimeSecondsrequired

number

materialsrequired

object[]

coloroptional

string

indexrequired

number

materialTyperequired

string

usedGramsrequired

number

usedMetersrequired

number

platesoptional

object[]

estimatedPrintTimeSecondsrequired

number

materialsrequired

object[]

coloroptional

string

indexrequired

number

materialTyperequired

string

usedGramsrequired

number

usedMetersrequired

number

plateIdrequired

number

totalWeightGramsrequired

number

profilesoptional

object

filamentProfileIdsrequired

string[]

filamentProfileNamesrequired

string[]

machineProfileIdrequired

string

machineProfileNamerequired

string

processProfileIdrequired

string

processProfileNamerequired

string

slicedAtrequired

string

slicerVersionrequired

string

totalWeightGramsrequired

number

sourceoptionalnullable

"google-drive" | "onedrive"

Which integration created this part. Set only by the cloud-storage providers today; null on every other creation path (upload, API, OpenSCAD, …) rather than carrying a synthetic "manual" value, so existing parts need no backfill. Not user-editable — it records what happened, not a preference.

google-driveonedrive

storeIdrequired

string

pattern: ^[a-z0-9]{24}$

thumbnailUrirequirednullable

string

typerequired

enum

scadcadquerybuild123dstlstep3mfgcode3mfgcode

updatedAtrequired

string

format: date-time

uploadedAtoptionalnullable

string

format: date-time

use3MFProcessProfileoptional

boolean

3MF parts only. Slice with the process profile embedded in the 3MF instead of the printer's. When omitted on a 3MF part (and overriddenProcessProfileId is null), it is turned on for you.

userTagsoptional

string[]

max items: 10

Example Response

201 OK — application/json

{
  "name": "string",
  "type": "scad",
  "description": "string",
  "fileUris": [
    "string"
  ],
  "fileHashes": [
    "string"
  ],
  "thumbnailUri": "string",
  "parameters": [
    {
      "default": 1,
      "options": [
        {
          "value": "string",
          "label": "string"
        }
      ],
      "description": "string",
      "min": 1,
      "max": 1,
      "step": 1,
      "acceptedContentTypes": [
        "string"
      ],
      "multiple": true,
      "defaultUri": "string",
      "label": "string",
      "serialReuse": "share",
      "sizing": "stretch",
      "name": "string",
      "type": "number",
      "value": 1
    }
  ],
  "printTags": {
    "printer.provider": "string",
    "printer.id": "string",
    "printer.nozzleDiameter": "string",
    "printer.modelName": "string",
    "filament.type": "string",
    "user.tags": "string"
  },
  "overriddenProcessProfileId": "string",
  "folderId": "string",
  "materials": [
    {
      "index": 0,
      "color": "string",
      "type": "string",
      "skip": true,
      "name": "string",
      "identifier": "string"
    }
  ],
  "slicerOverride": "string",
  "metadata": {
    "printerModel": "string",
    "filamentType": [
      "string"
    ],
    "filamentColors": [
      "string"
    ],
    "filamentDensities": [
      1
    ],
    "filamentDiameters": [
      1
    ],
    "nozzleDiameter": "string",
    "profileCompat": {
      "sliced": "string",
      "compatible": [
        "string"
      ],
      "safe": [
        "string"
      ]
    },
    "slicerVersion": {
      "engine": "orcaslicer",
      "version": "string"
    },
    "plates": [
      {
        "id": 1,
        "name": "string",
        "locked": true,
        "filamentMapMode": "string",
        "filamentMaps": [
          1
        ],
        "gcodeFile": "string",
        "thumbnailFile": "string",
        "thumbnailUploadedUri": "string",
        "thumbnailRenderedUri": "string",
        "thumbnailNoLightFile": "string",
        "thumbnailData": "string",
        "topFile": "string",
        "pickFile": "string",
        "topData": "string",
        "pickData": "string",
        "topUploadedUri": "string",
        "pickUploadedUri": "string",
        "patternBboxFile": "string",
        "sliced": {
          "index": 1,
          "extruderType": "string",
          "nozzleVolumeType": "string",
          "printerModelId": "string",
          "nozzleDiameters": "string",
          "timelapseType": "string",
          "prediction": 1,
          "weight": 1,
          "outside": true,
          "supportUsed": true,
          "labelObjectEnabled": true,
          "filamentMaps": "string",
          "objects": [
            {
              "identifyId": "string",
              "name": "string",
              "skipped": true
            }
          ],
          "filaments": [
            {
              "id": "string",
              "trayInfoIdx": "string",
              "type": "string",
              "color": "string",
              "usedM": 1,
              "usedG": 1
            }
          ],
          "warnings": [
            {
              "msg": "string",
              "level": 1,
              "errorCode": "string"
            }
          ],
          "layerFilamentLists": [
            {
              "filamentList": 1,
              "layerRanges": "string"
            }
          ]
        },
        "filamentIds": [
          "string"
        ]
      }
    ],
    "filamentIds": [
      "string"
    ],
    "textSlots": [
      {
        "key": "string",
        "label": "string",
        "text": "string",
        "volumeCount": 1,
        "fontName": "string",
        "fontVersion": "string",
        "surfaceType": 1,
        "occurrences": [
          {
            "plateId": 1,
            "objectId": "string",
            "instanceId": 1,
            "identifyId": "string"
          }
        ]
      }
    ],
    "plateRenderSourceHash": "string"
  },
  "slicingEstimate": {
    "estimatedPrintTimeSeconds": 1,
    "materials": [
      {
        "index": 1,
        "usedGrams": 1,
        "usedMeters": 1,
        "materialType": "string",
        "color": "string"
      }
    ],
    "totalWeightGrams": 1,
    "profiles": {
      "machineProfileId": "string",
      "machineProfileName": "string",
      "processProfileId": "string",
      "processProfileName": "string",
      "filamentProfileIds": [
        "string"
      ],
      "filamentProfileNames": [
        "string"
      ]
    },
    "slicedAt": "string",
    "slicerVersion": "string",
    "plates": [
      {
        "plateId": 1,
        "estimatedPrintTimeSeconds": 1,
        "materials": [
          {
            "index": 1,
            "usedGrams": 1,
            "usedMeters": 1,
            "materialType": "string",
            "color": "string"
          }
        ],
        "totalWeightGrams": 1
      }
    ]
  },
  "use3MFProcessProfile": true,
  "arrangeable": true,
  "userTags": [
    "string"
  ],
  "gcodePlateUris": {},
  "meshUri": "string",
  "meshSourceHash": "string",
  "meshError": "string",
  "uploadedAt": "2025-01-15T12:00:00.000Z",
  "customMetadata": {},
  "source": "google-drive",
  "processingStatus": "processing",
  "processing": {
    "workflowKey": "string",
    "fileHash": "string",
    "attempt": 1,
    "startedAt": "string",
    "finishedAt": "string",
    "failedStage": "fetch",
    "error": "string",
    "stages": [
      {
        "key": "fetch",
        "status": "running",
        "attempts": 1,
        "error": "string"
      }
    ]
  },
  "id": "string",
  "storeId": "string",
  "createdAt": "2025-01-15T12:00:00.000Z",
  "updatedAt": "2025-01-15T12:00:00.000Z"
}